2904623 Phoenix Contact AC/DC Power Supplies

Product Details

• Voltage
  2.5 kV
• Depth
  125 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Nominal input voltage range
  3x 400 V AC ... 500 V AC
• Discharge current to PE
  < 3.5 mA
• Type of protection
  Transient surge protection
• Nominal output current (IN)
  40 A
• Control deviation
  < 0.5 % (Static load change 10 % ... 90 %)
• Residual ripple
  < 50 mVPP (with nominal values)
• MTBF (IEC 61709, SN 29500)
  > 849000 h (25 °C)
• Connection method
  Push-in connection
• Conductor cross section flexible max.
  1.5 mm²
• HART FSK Physical Layer Test Specification Compliance
  Output voltage UOut compliant
• Standard - safety for equipment for measurement, control, and laboratory use
  IEC 61010-1
• UL approvals
  UL Listed UL 508
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Harmonic currents
  EN 61000-3-2
• DNV GL noise radiation
  Class B
• Comments
  Criterion A
• Input
  2 kV (Test Level 4 - symmetrical)
Installation distance right/left
5 mm / 5 mm
Climatic class
3K3 (in acc. with EN 60721)
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Power factor (cos phi)
0.95
Protective circuit/component
Varistor, gas-filled surge arrester
Dynamic Boost (IDyn.Boost)
60 A (5 s)
Connection in series
yes
Output power
960 W
Insulation voltage input/output
4 kV AC (type test)
Protection class
I
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG max.
16
EMC requirements, power plant
IEC 61850-3
Standard - Safety of transformers
EN 61558-2-16
Rail applications
EN 50121-3-2
SIQ
BG (type approved)
Additional text
Test Level 2
Electrostatic discharge
EN 61000-4-2
Fast transients (burst)
EN 61000-4-4
I/O/S
asymmetrical
Power frequency magnetic field
EN 61000-4-8
Damped oscillating magnetic field
EN 61000-4-10
Test level 6
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 9.0
27040701
Contact discharge
8 kV (Test Level 4)
Height
130 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Degree of pollution
2
Input voltage range
3x 400 V AC ... 500 V AC -20 % ... +10 %
Nominal power consumption
1217 VA
Inrush current
typ. 1.5 A (at 25 °C)
Nominal output voltage
24 V DC
Selective Fuse Breaking (ISFB)
215 A (15 ms)
Feedback voltage resistance
≤ 35 V DC
Typical response time
300 ms (from SLEEP MODE)
Efficiency
typ. 95.7 % (400 V AC)
Insulation voltage output / PE
0.5 kV DC (type test)
Conductor cross section solid max.
1 mm²
Conductor cross section flexible min.
0.2 mm²
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Standard - Safe isolation
IEC 61558-2-16
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
Noise emission
EN 55016
Frequency range
50 Hz ... 60 Hz
Surge voltage load (surge)
EN 61000-4-5
Voltage dip
0 %
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Asymmetrical conducted disturbance variables
EN 61000-4-16
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
ETIM 7.0
EC002540
Width
120 mm
Degree of protection
IP20
Ambient temperature (start-up type tested)
-40 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Current consumption
3x 1.8 A (400 V AC)
Mains buffering time
typ. 28 ms (3x 400 V AC)
Static Boost (IStat.Boost)
45 A
Derating
> 60 °C ... 70 °C (2.5%/K)
Maximum power dissipation in no-load condition
< 5 W (400 V AC)
Environmental protection directive
RoHS Directive 2011/65/EU
Insulation voltage input / PE
3.5 kV AC (type test)
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Shipbuilding approval
DNV GL, BV, LR, ABS
Flicker
EN 61000-3-3
DNV GL conducted interference
Class A
Electromagnetic HF field
EN 61000-4-3
Signal
4 kV (Test Level 2 - asymmetrical)
Frequency
50 Hz
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Test level 4
15 kHz 150 kHz (Test Level 4)
Input, output (test level 2)
10 MHz
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC002540
Installation distance top/bottom
50 mm / 50 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Installation height
≤ 5000 m (> 2000 m, observe derating)
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Recommended breaker for input protection
3x 4 A ... 20 A (Characteristic B, C, D, K or comparable)
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (constant capacity)
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Net weight
2.6 kg
Power loss nominal load max.
< 45 W (400 V AC)
Conductor cross section solid min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Conducted noise emission
EN 55016
Discharge in air
15 kV (Test Level 4)
Test field strength
100 A/m
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Pulse-shape magnetic field
EN 61000-4-9
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 4)
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
ECLASS 10.0.1
27040701
Voltage dips
EN 61000-4-11
Test level 1
15 Hz 150 Hz (Test Level 4)
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Attenuated oscillating wave
EN 61000-4-18
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 11.0
27040701