S18UUA Banner Ultrasonic Sensors

Product Details

• Weight181.4368 g
• Country Of OriginCN
• Main function
  Sensor (Distance)
• Sensing distance
  30...300mm
• Compliant with standard(s)
  cULus CCC CE
• Sub-range name
  S18U
• Primary brand
  Banner Engineering
• Thread size
  M18
• Connection type
  Pre-wired with 6.5ft / 2m cable terminated with bare end flying leads
• Material
  thermoplastic housing
• Order code / Manufacturer SKU
  02699
• Product series / family name
  U-GAGE series
• Design
  time-of-flight system
• Analog outputs
  1 x analog output (0-10Vdc)
• Emission frequency
  300kHz
• Supply voltage (DC)
  10Vdc-30Vdc (12Vdc / 24Vdc nom.)
• Shape
  Cylindrical threaded/barrel
• Degree of protection
  IP67 NEMA 6P
• Ambient air temperature for operation
  -20...+60 °C
• Functions
  Ultrasonic distance sensor (straight axis) green LED (power ON) yellow LED (output state) red LED (teach active) TEACH mode
Protection functions
Short-circuit
Primary Housing Material
ABS/Polycarbonate
Power
DC
Power Supply
12-30 V dc
NEMA Rating
NEMA 6P
Number of Pins
5
Rep Rate (ms)
2.5
Sensing Beam
Ultrasonic
Connection
Flying Leads
Vibration
MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Min Operating Temperature (°C)
-20
Device Type
Sensor
Input/Output
Analog
Temperature Effect (mm/°C)
0.02% of sensing distance/°C
Max Operating Temperature (°C)
60
Analog Linearity (mm)
+/- 0.5
Application: Ultrasonic
Yes
1-wire Serial Interface
No
Housing Style
Barrel - Straight
Analog Resolution/Discrete Repeatability
1 at 2.5 ms response speed, 0.5 at 30 ms response speed
Analog Voltage Output Rating
2.5 kΩ min. load impedance
Max Op. Relative Humidity Non-Condensing (%)
100
Minimum Window Size (mm)
5
IO Link
No
Profibus
No
PC Configurable
No
Quick Disconnect Type
No QD
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Warm-up Time (minutes)
10
Remote Teach and Laser Control Input Impedence
12 kΩ
PROFINET
No
Cable Length (m)
2
Max Sensing Distance (mm)
300
Discrete (Switched) Outputs
Bipolar (NPN & PNP)
Temperature Warm-up Drift upon Power-up
Temp. compensation enabled, < 1.0% of the sensing distance upon power-up.
Power/Current Consumption (exclusive of load)
65 mA max; 40 mA @ 25 V dc
Common Ethernet Protocol
No
Sensing Mode (General)
Proximity
Minimum Sensing Distance (mm)
30
IP Rating
IP67
Temp. Warm-up Drift (Notes 1)
After 30 min, the apparent switchpoint is < 0.5% of the actual position.
RS-232
No
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Max Measurement Range
>100 mm - <=500 mm
Indicator
LED(s)
Delay at Power-up (ms)
300
Output Protection
Protected against short circuit conditions
Temp. Warm-up Drift (Notes 2)
After 60 min, the apparent switchpoint is < 0.3% of the actual position.
Ultrasonic Frequency (kHz)
300
RS-422
No
Sensing Mode (Detailed)
Time of Flight
Analog Output Configuration
0-10 V dc
Adjustments
Push Button; Remote Teach
Storage Temperature (°C)
-40 to 80
Minimum Response Time (ms)
2.5
Feature: Remote Teach
Yes
RS-485
No
Feature: Timing (Hold/Delay)
No
SSI
No
Barrel Diameter (mm)
18
Feature: Clear Object Detection
Yes
Wireless
No
Feature: Chemical Resistant
No

Related documents S18UUA Specs